Sign Supports

Signfix Systems Ltd offers a full range of sign supports that have been tested and deemed to comply with the requirements of NZTA:P/24 Performance Based Specification for Traffic Signs as defined in the RSMA Compliance Standard for Traffic Signs. Sign supports must comply with the impact requirements of NZTA P/24 Performance Based Specification for Traffic Signs (the specification) as defined in the RSMA Compliance Standard for Traffic Signs (the Standard).

The specification requires that sign supports shall have proven impact performance as demonstrated by a listing as an approved system under (USA) Federal Highway Administration (FHWA) Roadside Hardware Acceptable Breakaway Sign Supports Listing. Listing is granted following successful crash testing under provisions of NCHRP Report 350 Test Level 3. Sec 4.3.3 (a) of the standard details sign supports Deemed to Comply with Impact Requirements of the Specification. Para(iv) defines Aluminium posts manufactured from Grade 6261 T% (225MPa yield strength) not exceeding 114mm OD with a maximum wall thickness of 4.7mm.

Signfix Aluminium Fluted Poles meet this specification and are therefore deemed to comply, when installed with a Signfix Ground Socket.